Saw station PLS 300 from Bosch – The ideal addition to your green Bosch jigsaw
The mobile saw station helps you to make straight cuts quickly and safely in laminate, parquet, plastics and aluminium. Simply place the work piece on the saw station, close the aluminium guide – then saw in perfect straight lines. This practical saw station has a guide channel which makes even horizontal angle cuts up to +/– 45° and vertical mitre cuts incredibly easy. Set up, adjust and start sawing with your Bosch saw station PLS 300!
The saw station PLS 300 is always the ideal tool for trimming panels or square timbers up to widths of 31.5 cm and thicknesses of 25 mm, for angled cuts up to +/– 45° and for mitre cuts or adjustment cuts. When laying floor coverings, for example, the saw station enables quick, safe and straight sawing of parquet, laminate, skirting boards and even aluminium strips.
The centrepiece of this all-purpose saw station is the aluminium guide channel, which guides the sole plate of the jigsaw and, therefore, also the saw blade. At the same time, it also holds the work piece firmly in place. The guide channel can be set precisely using an easy-to-read scale to perform horizontal angled cuts up to +/– 45°. The work piece stop on the saw station PLS 300 can be extended symmetrically using two modules that are supplied as standard. The saw station can also be extended asymmetrically for working on particularly long work pieces. There are two supports delivered with the saw station to help the user when sawing wider work pieces. The guide rail including the carrier section can be removed for sawing cut-outs. When performing rip-cuts, the supports are fitted to the guide rail carrier. To make accurate mitre cuts on skirting boards, for example, the user sets the sole plate of the Bosch jigsaw to the 45° position.
The handy Saw Station PLS 300 from Bosch: For precise cuts with green Bosch jigsaws.
